Mavrix is now an authorized distributor of Stoody® wire products. We have worked closely with Stoody to select the best wire in the industry to match our machine applications to offer our customers a complete solution. View the available products by application or click the Stoody® logo below to continue to their site.
In nearly all of our applications we recommend a single wire solution to minimize the number of products our customer needs to stock (lowering your costs) and eliminate the concern of residual hard facing from the previous build up. With a single wire there is never a need to remove the previous hard surface before building up.
CAR SHREDDER DISC - Stoody® 110MC
Stoody® 110MC is a modified high chromium high manganese steel used in the rebuilding of manganese steel parts subject to severe impact loading. This is a single wire solution for building up and hardfacing the rotors. By using a single wire for maintaining your discs there is no need to stock two different products and there is no concern or need to remove any hardfacing left from the previous job before building up again. A wire with high welder appeal and very low slag allows it to be built up in multiple layers without concern of trapping slag and have layer failures. The wire goes down soft HRC 17 and will work harden to HRC55.
Available in 7/64 Dia. 60# coils for machine application. 110-O in 1/16 is an open arc wire for the hammer swing areas and build up on the side of the shredder disc. No worry about compatibility!
ROCK CRUSHING - Stoody® 110-O
Stoody® 110-O is also a modified high chromium high manganese steel widely used in the rebuilding of manganese steel parts subject to severe impact loading. This material offers excellent cavitation resistance; good toughness and wear resistance; can be used as the final hardfacing layer in extreme impact applications. The wire goes down soft HRC 17 and will work harden to HRC55 a great single wire solution for building up and providing the final hard faced layer.
Avialable in 7/64 Dia. in 60# coils, 110# QP and 200# HP
PULVERIZER APPLICATIONS Stoody® - CP2000
Stoody® CP2000 is a specially formulated chromium carbide alloy designed to produce a high concentration of uniformly distributed small primary chromium carbides in an austenitic matrix. The formulation has been optimized to result in superior weldability for a broad range of single and multiple layer applications. The high concentration of small primary carbides greatly improves wear resistance and toughness over conventional chromium carbide alloys. It can be applied to carbon, low alloy and manganese steels. In special applications such as coal pulverizer rebuilding, it can be applied to cast irons. The deposits can not be machined or forged and can be used in hot wear applications up to 900F
Avialable in 7/64 Dia. in 60# coils & 200# HP
ID PIPE HARDSURFACING - Stoody® CP2000
Stoody® CP2000; See description above.
DREDGE PUMP SHELLS - Stoody® 117
Stoody® 117 deposit consists of uniformly dispersed chromium carbides in a semi-austenitic matrix that provides a deposit with good impact, abrasion, and anti-galling properties. It develops a light crosschecking pattern which allows this material to be applied in multiple layers without difficulty. It is frequently used as both a build-up and hardfacing alloy on carbon, low alloy, and manganese steels. Weldability is very good and deposits are not machinable.
Available in 7/64 Dia. in 60# Coils & 200# HP
WEAR PLATE - Stoody® 965-G
Stoody® 965-G deposit is a general purpose hardfacing alloy that offers a good balance of impact and abrasion resistance. It can be used in both metal-to metal and metal-to-earth applications. Deposits are martensitic and forgeable but not readily machinable. It can be applied to carbon, low alloy, and manganese steels. It is magnetic on carbon and low alloy steels. Analysis and properties are similar to Stoody Self Hardening covered electrode.
Available in 1/16 Dia. in 50# PP, 200# HP & 400# NTD
ORDER DIRECT FROM MAVRIX - 262-439-8477
Ordering wire from Mavrix is as simple as picking up the phone. We are happy to discuss your application, what you are using currently and how to make the transition to Stoody® products. Ordering directly from Mavrix enables you to order low minimum quantities, without freight charges and fast factory direct delivery. To continue to the Stoody® site click the link below